This product is an RJ45 1x1 Tab Down connector with integrated LEDs (Green, Red, Yellow) for 10/100Base-T applications. It features gold flash plating on the contact area and is designed for through-hole mounting. The connector is built to meet standard RJ45 plug specifications and performance requirements for electrical, mechanical, and environmental conditions.
RB1-125BAG1A
RB1111-00
RJ45 1X1 Tab Down UDE P/N: LED L G R Y ll 10/100Base-T Contact Area : Gold Flash Through Hole LED:L-Green; R-Yellow
RB1111-00
2009/8/27
RB1111-00
| Dimension | Tolerance |
| General Tolerance X.X | 0.13 mm |
| General Tolerance X.XX | 0.08 mm |
| General Tolerance X.XXX | 0.25 mm |
| Category | Specification |
| Design and Construction | Product shall be of design, construction and physical dimensions specified on applicable. |
| Material - Terminal Parts (Underplating : 30" min. Nickel overall) | |
| - RJ Terminal | PH. Bronze, Thickness=0.30mm, Finish: Contact Area: Gold Flash |
| - Input Terminal | Brass, Thickness=0.35mm, Finish: 100" min. Tin |
| - Case Terminal | Brass, Thickness=0.30mm, Finish: 100" min. Tin |
| Material - Plastic Parts | |
| - Housing | High Temperature Thermoplastic, Black <UL94V-0> |
| - Case | High Temperature Thermoplastic, Black <UL94V-0> |
| Material - Shield Parts | Stainless, Thickness=0.20mm, Pre-soldering |
| Operating Temperature | 0C to +70C |
| Storage Temperature | -40C to +85C |
| RJ45 Specifications - Insertion force with the latch depressed | 22N max |
| RJ45 Specifications - Removal force with the latch depressed | 50N min. @ 60+/-5 sec |
| RJ45 Specifications - Locking Force of Plug Latch | 44N max |
| RJ45 Specifications - Insulation Resistance | 500M min. |
| RJ45 Specifications - Durability | 2500 cycles |
| Packaging and Packing | All parts shall be packaged and packed to protect against physical damage, corrosion and deterioration during shipment and storage. |
| Parameter | Specification | Unit |
| LED - Green | Emitting Color p | 565 |
| LED - Green | Vf @If=20mA | 1.7 ~2.6 |
| LED - Green | Ir @Vr=5V | 10A max. |
| LED - Yellow | Emitting Color p | 585 |
| LED - Yellow | Vf @If=20mA | 1.7 ~2.6 |
| LED - Yellow | Ir @Vr=5V | 10A max. |
| Transmitter filter & Receiver filter - Insertion loss | -1.0dB max. (1~100 MHz, 100 load) | dB |
| Transmitter filter & Receiver filter - Return loss | -18dB min. (1~30 MHz, 100 load) | dB |
| Transmitter filter & Receiver filter - Return loss | -16dB min. (30~60MHz, 100 load) | dB |
| Transmitter filter & Receiver filter - Return loss | -12dB min. (60~80MHz, 100 load) | dB |
| Common Mode Rejection | -30dB min. (@ 1~100 MHz) | dB |
| Cross Talk | -30dB min. (@ 1~100 MHz) | dB |
| Inductance | 350 H min. (Input(R1-R2), Input(R7-R8)) @ 100KHz, 0.1V, 8mA DC BIAS | H |
| Inductance | 1500H min. (Output(C3-C6)) @ 100KHz, 0.1V, 8mA DC BIAS | H |
| HiPot Test - Input to Output | 1500Vac 60s or 2250Vdc 60s | Vac/Vdc |
| HiPot Test - Input to Input | 1500Vac 60s or 2250Vdc 60s | Vac/Vdc |
| HiPot Test - Output to Output | 1500Vac 60s or 2250Vdc 60s | Vac/Vdc |
| Code | Description |
| A. LED Code | C : L-Green; R-Yellow. <Refer to Schematic of LED> |
| B. Mechanical Code | AG1 : w/ UDE Logo, w/ all Spring, Rear side Leg, Board Lock |
| C. Schematics Code | 1 : AG1 circuit |
| D. Plating Code | A : Underplating 30" min. Nickel overall |
| D. Plating Code | 1 : Contact Area 30" gold |
| D. Plating Code | 2 : Contact Area 15" gold |
| D. Plating Code | 3 : Contact Area 10" gold |
| D. Plating Code | 4 : Contact Area 50" gold |
| D. Plating Code | 6 : Solder Tail 100" min. Bright Tin |
| D. Plating Code | B : Solder Tail 100" min. Matted Tin |
| D. Plating Code | D : Solder Tail 6" gold |
| D. Plating Code | F : Solder Tail 6" gold |
| D. Plating Code | G : Solder Tail 30" gold |
| D. Plating Code | 4 : Contact Area 50 gold |
| D. Plating Code | 5 : Contact Area 50 gold |
| Stage | Temperature (C) | Time (sec) |
| Preheat Zone 1 | 150 | 60 |
| Preheat Zone 2 | 180 | 60 |
| Dipping Zone | 240 | 5-10 |
| Cooling Zone | Room Temp | 60 |
