Carries power in addition to signal to enable use in base configuration Power over Camera Link (PoCL) applications. Connects to Mini-Camera Link style (SDR) I/O ports on both PoCL camera and PoCL framegrabber. Entire cable bundle shielded with foil and braid for additional signal protection. Rugged ribbon type contact for reliable, repeatable connectivity. EMI shielded end-to-end for reduced emissions.
3M
Interconnect Solutions
1SD26-X1XX-00C-XXX
Shrunk Delta Ribbon (SDR)
26
Standard (Gray) or Flexible (Black)
30 " [0.76 m] Min. Gold (Wiping Area)
100 " [2.54 m] Nickel
Polyvinyl Chloride (PVC)
Polyvinyl Chloride (PVC)
Gray or Black
AWM VW-1
30 V
0.5 A
> 1 x 108 at 100 VDC
125 VAC (RMS) for 1 minute
0C to +70C
E86982
| Part Number Suffix | Cable Exit & Attachment Direction | Cable Length | Description |
|---|---|---|---|
| 1SD26-X120-00C-XXX | Straight-Straight | Variable (e.g., 200 cm, 500 cm, 1000 cm) | Figure 1: Straight SDR - Straight SDR |
| 1SD26-X13X-00C-XXX | Camera end right-angle, cable exit opposite position 1 | Variable (e.g., 200 cm, 500 cm, 1000 cm) | Figure 2 & 3: Straight SDR - Right-Angle SDR |
| 1SD26-X137-00C-XXX | Camera end right angle, cable exit same side as position 1 | Variable (e.g., 200 cm, 500 cm, 1000 cm) | Figure 4: Right-Angle SDR |
| Connector Position | Signal | Connector Position | Signal |
|---|---|---|---|
| CN-1 | +12V | CN-2 | +12V |
| 1 | +12V | 26 | +12V |
| 2 | CC4- | 15 | CC4- |
| 3 | CC4+ | 14 | CC4+ |
| 4 | CC3- | 16 | CC3- |
| 5 | CC3+ | 17 | CC3+ |
| 6 | CC2- | 18 | CC2- |
| 7 | CC2+ | 19 | CC2+ |
| 8 | CC1- | 20 | CC1- |
| 9 | CC1+ | 21 | CC1+ |
| 10 | SerTFG- | 22 | SerTFG- |
| 11 | SerTFG+ | 23 | SerTFG+ |
| 12 | SerTC- | 7 | SerTC- |
| 13 | SerTC+ | 20 | SerTC+ |
| 14 | Inner Shield Drain Wire | 13 | Inner Shield Drain Wire |
| 15 | Inner Shield Drain Wire | 14 | Inner Shield Drain Wire |
| 16 | X3+ | 8 | X3+ |
| 17 | X3- | 19 | X3- |
| 18 | Xclk+ | 9 | Xclk+ |
| 19 | Xclk- | 22 | Xclk- |
| 20 | X2+ | 10 | X2+ |
| 21 | X2- | 23 | X2- |
| 22 | X1+ | 11 | X1+ |
| 23 | X1- | 24 | X1- |
| 24 | X0+ | 12 | X0+ |
| 25 | X0- | 2 | X0- |
| 26 | Shell Braid Shield | Shell | Shell Braid Shield |
| Specification | Value | Unit |
|---|---|---|
| Cable Characteristic Impedance (Twisted Pairs) | 100 | ± 10 differential |
| Conductor Size | 28 | AWG Stranded |
| Skew (within pair) | 50 | ps/meter maximum |
| Skew (Channel skew per chipset) | 100 | ps/meter maximum |
| Skew (Channel skew for 1SD26-R1XX-00C-XXX) | 50 | ps/meter maximum |
This product is RoHS Compliant 2005/95/EC. Contains no hazardous substances in excess of maximum concentration values, unless exempt.
Contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC.
Contains lead in the solder tail area in excess of the maximum concentration value allowed.
Contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products placed on the EU market after June 30, 2008.
Contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive.
Symbol indicates product or part does not contain lead, mercury, hexavalent chromium, PBBs, or PBDEs (excluding decaBDE) in excess of 0.1% by weight, or cadmium in excess of 0.01% by weight in any homogeneous material.
