Function: TYPE-C 16PIN connector for data and power transmission.
Usage: Designed for use within a practical temperature range of -25~85C.
Application Scenarios: Suitable for various electronic devices requiring a reliable USB Type-C connection.
| Item | Test Conditions | Performance/Specification | Unit |
|---|---|---|---|
| Connection Force | After 3 cycles using standard plug gauge | 0.5-2.0 | Kgf |
| Disconnection Force | After 3 cycles using standard plug gauge | 0.8~2.0 | Kgf |
| Terminal Strength | 0.1N/m (1kgf/cm) static load for 1 min in any direction | No damage, meets electrical & mechanical characteristics | N/A |
| Contact Resistance | Measured at small current (100mA), 1000Hz | 40 | m |
| Insulation Resistance | Apply 100V DC for 1 min | 100 | M |
| Dielectric Strength | AC 100Vrms (50-60Hz) for 1 min, Trip Current: 0.5mA | No damage, arcing, or breakdown | V |
| Solderability Test | Dipped 1mm in solder bath at 2505 for 50.5 sec | Solder wetting time 3 sec, Soldering area 75% | sec / % |
| Resistance to Soldering Heat Test (Reflow) | Preheat 180 (120s), Peak 2605 (20s) | No deformation of case, meets electrical characteristics | / s |
| Resistance to Soldering Heat Test (Iron) | Bit temp 3305, Application time 30.5 sec | No deformation of case, meets electrical characteristics | / sec |
| Humidity Test | 402, 90%-96% RH for 96 Hr, then 1 Hr at standard conditions | Meets mechanical & electrical characteristics | Hr / % |
| Heat Test | 702 for 96 Hr, then 1 Hr recovery at room temp | No appearance damage, meets mechanical & electrical characteristics | / Hr |
| Cold Test | -253 for 96 Hr, then 1 Hr recovery at room temp | No appearance damage, meets mechanical & electrical characteristics | / Hr |
| Life Test (No Load) | 10000 cycles at 10-25 cycles/min | Meets mechanical & electrical characteristics | Cycles |
| Life Test (Load) | 10000 cycles at 10-20 cycles/min (Rating condition, non-inductive load) | Contact Resistance 0.1, Disconnection Force 0.8-2.0Kgf, Meets mechanical & electrical characteristics | / Kgf |
| Temperature Cycling Test | 5 cycles (detailed in figure) | No deformation/cracks, Insertion/Extraction Force 3-20N, Contact Resistance Max.30m, Insulation Resistance Min.100M, Dielectric Withstanding Voltage 100VAC/min (between terminals) | N |
| Cold & Heat Shock Test | 5 cycles (detailed in figure) | No deformation/cracks, Insertion/Extraction Force 3-25N, Contact Resistance Max.30m, Insulation Resistance Min.100M, Dielectric Withstanding Voltage 500VAC/min (between terminals) | V |
