The INDUSTRIAL MINI I/O Connector is designed to provide high-performance connectivity in industrial environments. This specification covers the requirements for product performance, test methods, and quality assurance provisions for these connectors.
| Test Item | Requirements | Procedure |
|---|---|---|
| Termination Resistance | 40 m Max (Initial); 50 m Max (After Test) | 20mV Max open circuit at 100mA |
| Insulation Resistance | 500M Min | 100V DC, 1 minute hold |
| Dielectric Withstanding Voltage | No creeping discharge/flashover; 0.5mA Max leak current | 1000V DC (Contacts); 1500V DC (Contact-Shield) |
| Temperature Rising | 30C Max | Measure under loaded rating current |
| Connector Mating Force | 30 N Max | Operation speed 10mm/min |
| Connector Unmating Force | 30 N Max | Operation speed 10mm/min |
| Durability | Meet Termination Resistance requirements | 1500 cycles (SMT/DIP) |
| Vibration (Low Frequency) | No discontinuity > 1sec | 10-55-10 Hz, 1.52mm amplitude |
| Physical Shock | No discontinuity > 1sec | 30G, 11ms, half-sine wave |
| Temperature Life | Meet Termination Resistance requirements | 85C, 315 hours |
| Humidity (Steady State) | Meet Insulation/Dielectric/Termination requirements | 40C, 90-95% R.H., 240 hours |
