This 1x2 Port RJ45 Connector with Integrated Magnetics and LEDs is designed for 10/100Base-TX NIC applications. It meets or exceeds IEEE802.3 standards, offering high performance for EMI suppression, crosstalk, return loss, and consistent electrical characteristics. The integrated design minimizes PCB space and simplifies layout, leading to higher reliability and yields by reducing the number of magnetic components on the PCB. It provides a minimum of 1500Vrms isolation per IEEE802.3 requirement.
HanRun Electronics Company Limited
China
IEEE802.3 standards
10/100Base-TX NIC Applications
| Specification | Value | Condition |
|---|---|---|
| OCL | 350uH Minimum | @100KHz, 100mV, 8mADC |
| Isolation | 1500Vrms Minimum | per IEEE802.3 requirement |
| Insertion Loss | -1.0dB Maximum | @300KHz ~ 100MHz |
| Return Loss | -20dB Minimum | @1MHz ~ 10MHz |
| -16dB Minimum | @10MHz ~ 30MHz | |
| -12dB Minimum | @30MHz ~ 60MHz | |
| -10dB Minimum | @80MHz ~ 80MHz | |
| Common Mode Rejection | -30dB Minimum | @1MHz ~ 50MHz |
| Crosstalk | -20dB Minimum | @50MHz ~ 150MHz |
| -40dB Minimum | @1MHz ~ 30MHz | |
| -35dB Minimum | @30MHz ~ 60MHz | |
| -30dB Minimum | @60MHz ~ 100MHz | |
| Green LED Wavelength | 568nm | (Min/Max) |
| Green LED Forward Voltage | 1.8V / 2.8V | (Min/Max) |
| Green LED Forward Current | 20mA |
| Dimension | Value (mm) |
|---|---|
| Overall Length | 33.25 0.50 |
| Overall Width | 15.21 0.50 |
| Pin Length (Min) | 3.05 |
| Mounting Hole Diameter | 1.02 x 8 |
| Mounting Hole Spacing | 3.25 x 2 |
| LED Hole Diameter | 1.63 x 3 |
