Designed for Network Interface Card applications, this RJ45 connector offers integrated magnetics and LEDs for 10/100/1000Base-TX applications. It meets or exceeds IEEE802.3ab standards, providing high performance for EMI suppression, minimal PCB space, and simplified PCB layout. The integrated magnetics reduce the number of components on the PCB, leading to higher reliability and yields.
| Specification | Value | Condition |
|---|---|---|
| Isolation | 1500Vrms | 0.5mA 60S (UTP Side to Chip Side) |
| OCL (Open Circuit Inductance) | 350uH Minimum | @100KHz, 100mV with 8mADC |
| Insertion Loss | -1.0dB Maximum | @100KHz ~ 60MHz |
| Insertion Loss | -1.1dB Maximum | @80MHz ~ 100MHz |
| Return Loss | -18dB Minimum | @0.3MHz ~ 30MHz |
| Return Loss | -14dB Minimum | @40MHz ~ 860MHz |
| Return Loss | -12dB Minimum | @80MHz ~ 100MHz |
| Common Mode Rejection | -40dB Minimum | @1MHz ~ 60MHz |
| Common Mode Rejection | -35dB Minimum | @60MHz ~ 100MHz |
| Crosstalk | -35dB Minimum | @1MHz ~ 10MHz |
| Crosstalk | -26dB Minimum | @15MHz ~ 60MHz |
| Crosstalk | -24dB Minimum | @60MHz ~ 100MHz |
| LED Type | Wavelength (nm) | Forward Voltage (V) | Forward Current (mA) | Type |
|---|---|---|---|---|
| Green/Yellow | 568nm/586nm | 1.8v/2.8v | 20mA | squareness |
| Yellow | 586nm | 1.8v/2.8v | 20mA | squareness |
| Dimension | Value (mm) | Tolerance |
|---|---|---|
| D | 3.05 Typ | N/A |
| Overall Length | 16.25 | N/A |
| Body Width | 15.80 | 0.5 |
| Overall Width | 20.00 | 1.50 |
| PCB Layout Pin Spacing | 2.54 | 2.54 |
| Panel Cutout Width | 14.00 | 0.13 |
| Panel Cutout Height | 16.75 | 0.13 |
