This product is a Type-C connector, likely a receptacle, designed for robust applications. It features high-temperature plastic housing with UL94 V-0 rating and is RoHS compliant. The connector is suitable for various electronic devices and systems requiring reliable data and power transmission.
| Specification | Details |
|---|---|
| Material & Finish | See List |
| Plating Specification - Contacts | Ni 50u" MIN. UNDER PLATED OVER ALL. Au PLATED ON THE MATING AREA OF CONTACT. Au PLATED ON THE SOLDER AREA. |
| Plating Specification - Shell | Ni 30u" MIN. UNDER PLATED OVER ALL. |
| Plating Specification - Mid Plate | Clear Only |
| Mechanical - Mating Force | 0.5~2.0 kgf |
| Mechanical - Unmating Force | 0.8~2.0 kgf (0.6~2.0 kgf After Durability Test) |
| Mechanical - Durability | 5000 Cycles |
| Electrical - Current Rating | 3A Max. |
| Electrical - Voltage Rating | 20V Max. |
| Electrical - Dielectric Withstanding Voltage | 100V AC |
| Electrical - Contact Resistance | 40 m Ohms Max. |
| Electrical - Insulation Resistance | 100 M Ohms Min. |
| Environmental - Operating Temperature | -30C ~ +80C |
| Environmental - Wetting Temperature | 2655C, 50.5s |
| Environmental - Salt Spray Test | 48H Min. |
| Recommended P.C.B. Layout Tolerance | Unspecified 0.05mm |
| Pin Define Table | D+, D-, VBUS, GND, A12, CC1, VBUS, GND, A11, A10, A9, A8, A7, A6, A5, A4, A3, A2, A1, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12, GND, GND, VBUS, VBUS, CC2, SIGNAL PIN, SIGNAL PIN, SBU1, SBU2 |
| View with Cap (Scale 1:2) | Cap: 1, High temperature plastic UL94 V-0, Black |
| Dimensions (Approximate) | 11.95 x 10.00 x 4.50 mm (Main Body); 8.94 x 7.50 mm (Cap Area) |
| Item | Test Conditions | Performance | Unit |
|---|---|---|---|
| Connection Force | After connecting and disconnecting using standard plug gauge 3 times. | 0.5-2.0 | Kgf |
| Disconnecti on Force | After connecting and disconnecting using standard plug gauge 3 times. | 0.8-2.0 | Kgf |
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction. No damage, cracks, looseness or play. | Satisfied | - |
| Item | Test Conditions | Performance | Unit |
|---|---|---|---|
| Contact Resistance | Measured at small current (100mA or less) 1000Hz. | 40 Max. | m |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to specified portions. | 100 Min. | M |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min. Trip current: 0.5mA. No arcing or breakdown. | Satisfied | - |
| Item | Test Conditions | Performance | Unit |
|---|---|---|---|
| Solderability Test | Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds. | Solder wetting time 3 sec; Soldering area > 75% | - |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180 (120s). Tallest Temp: 2605 ( 20s). No deformation. | Satisfied | - |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit Temp: 3305. Application Time: 30.5 sec. No excessive pressure. No deformation. | Satisfied | - |
| Humidity Test | Stored at 402 and 90%-96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | No damage on appearance. Satisfied mechanical and electrical characteristics. | - |
| Heat Test | Stored at 702 for 96 Hours, then subjected to controlled recovery. | No damage on appearance. Satisfied mechanical and electrical characteristics. | - |
| Cold Test | Stored at -253 for 96 Hours, then subjected to controlled recovery. | No damage on appearance. Satisfied mechanical and electrical characteristics. | - |
| Life Test (No Load) | Connection/disconnection for 5000 cycles at 10-25 cycles/min. | Satisfied | - |
| Life Test (Load) | Connection/disconnection for 5000 cycles at 10-20 cycles/min (Rating condition, non-inductive load). Contact Resistance 0.1; Disconnection Force 0.8-2.0N. | Satisfied | - |
| Temperature Cycling Test | 5 cycles of specified temperature profile. No deformation or cracks. Insertion/Extraction Force: 3-20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | Satisfied | - |
| Cold & Heat Shock Test | 5 cycles of specified temperature profile. No deformation or cracks. Insertion/Extraction Force: 3-25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | Satisfied | - |
