This document details the specifications for a USB Type-C connector, including material, plating, mechanical, electrical, and environmental performance. It also provides pin assignments.
N/A
Housing: High Temperature Resistant Plastic, UL94 V-0
Contacts: Copper Alloy
Mid Plate: Stainless Steel
Front Shell: Stainless Steel
Contacts: Ni 50u MIN. Under Plated Over All. Au Plated on the Functional Area of Contact. (Gold plating thickness follow the P/N)
Plating Specifications of the Solder Area follow the P/N
Front Shell: See Table 1
Shield Plate & EMI Plate: Clear Only
| Specification | Details |
|---|---|
| Insertion Force | 0.5~2.0 kgf |
| Removal Force | 0.8 kgf~2.0 kgf |
| Durability | 5000 Cycles |
| Current Rating | 3.0A |
| Voltage Rating | 5.0V |
| LLCR (VBUS & GND Pins and Other Pins) | 40 m/Pin MAX. |
| LLCR (Shield) | 50 m/MAX. |
| LLCR Max. Change of All Pins | 10 m |
| Insulation Resistance | 100 M MIN |
| Dielectric Withstand Voltage | AC 100V for 1 Minute |
| Operating Temperature | -25C ~ +85C |
| IR Reflow | Peak temperature on the board shall be maintained for 10 seconds at 260C. |
| PIN | SIGNAL NAME |
|---|---|
| A5 | CC1 |
| A12 | GND |
| B5 | CC2 |
| B12 | GND |
| 1 | VBUS |
| 2 | D- |
| 3 | D+ |
| 4 | ID |
| 5 | VBUS |
