This document details the technical specifications and testing procedures for a USB Type-C connector manufactured by SHENZHEN JUSHUO ELECTRONICS CO.,LTD. It covers contact current ratings, temperature rise limits, mechanical requirements (insertion/extraction force, durability), and environmental conditions.
SHENZHEN JUSHUO ELECTRONICS CO.,LTD
China
EIA-364-70 method B, EIA-364-13, EIA-364-09
| Item | Requirements | Test Methods | Test Reference Standard |
|---|---|---|---|
| Contact Current Rating - VBUS Pins | 3.0 A collectively to VBUS pins (A4, A9, B4, B9) | Applied current | EIA -364-70 method B |
| Contact Current Rating - VCONN Pin | 1.25 A to VCONN pin (B35) with return path through GND pins (A1, A12, B1, B12) | Applied current | EIA -364-70 method B |
| Contact Current Rating - Other Contacts | Minimum 0.25 A individually to all other contacts | Applied current | EIA -364-70 method B |
| Temperature Rise | Shall not exceed 30 C at any point on the USB Type-C mated plug and receptacle when measured at an ambient temperature of 25 C. | Temperature measurement | EIA -364-70 method B |
| Insertion Force | 0.5~2.0 kgf | Measure the force required to mate connector at a maximum rate of 12.5mm/minute. | EIA-364-13 |
| Extraction Force | 0.8~2.0 kgf | Measure the force required to unmate connector at a maximum rate of 12.5mm/minute. | EIA-364-13 |
| Durability (Insertion/Extraction Cycles) | 10,000 cycles | Durability test at a maximum rate of 200 cycles per hour. No physical damage to any part of the connector and cable assembly shall occur. | EIA-364-09 |
| Specification | Value | Unit |
|---|---|---|
| Housing & Molding Material | High temperature resistant plastic, UL94 V-0 | |
| Contacts Material | Copper Alloy | T=0.15mm |
| Middle Clip Material | SUS301-3/4H | T=0.15mm |
| Shell Material | SUS304 | |
| Mating Force | 0.5~2.0 | kgf |
| Unmating Force | 0.8~2.0 | kgf |
| Unmating Force (After Durability Test) | 0.6~2.0 | kgf |
| Durability | 10000 | Cycles |
| Current Rating | 3 | A Max. |
| Voltage Rating | 20 | V Max. |
| Dielectric Withstanding Voltage | 100 | V AC |
| Contact Resistance | 40 | mOhms Max. |
| Insulation Resistance | 100 | MOhms Min. |
| Operating Temperature | -40 to +85 | C |
| Wetting Temperature | 265+5C, 5+0.5s |
