This report details the testing conducted on the USB Type-C connector, focusing on electrical and mechanical performance.
SHENZHEN JUSHUO ELECTRONICS CO.,LTD
China
| Item | Requirement | Test Method | Test Result (Max) | Test Result (Min) | Test Result (Avg) | Specification | Judge |
|---|---|---|---|---|---|---|---|
| Contact Current Rating | VBUS pins: 3.0 A (A4, A9, B4, B9) | EIA-364-70 method B | - | - | - | - | - |
| Contact Current Rating | VCONN pin (B35): 1.25 A | EIA-364-70 method B | - | - | - | - | - |
| Contact Current Rating | Other contacts: 0.25 A | EIA-364-70 method B | - | - | - | - | - |
| Temperature Rise | Max 30 C at ambient 25 C | EIA-364-70 method B | - | - | - | - | - |
| Insertion Force | 0.5~2.0 kgf | EIA-364-13 | 10.25 kgf | 8.97 kgf | 9.51 kgf | 0.5~2.0 kgf | OK |
| Extraction Force | 0.8~2.0 kgf | EIA-364-13 | 15.17 kgf | 14.57 kgf | 14.89 kgf | 0.8~2.0 kgf | OK |
| Durability (Cycles) | 10,000 cycles | EIA-364-09 | - | - | - | 10,000 cycles | OK |
| Insertion/Extraction Cycles | 10,000 cycles | EIA-364-09 | - | - | - | 10,000 cycles | OK |
| Mechanical - Mating Force | 0.5~2.0 kgf | EIA-364-13 | 13.92 kgf | 9.17 kgf | 11.57 kgf | 0.5~2.0 kgf | OK |
| Mechanical - Unmating Force | 0.8~2.0 kgf | EIA-364-13 | 17.30 kgf | 8.71 kgf | 12.99 kgf | 0.8~2.0 kgf | OK |
| Durability Force | 0.5~2.0 kgf after 10,000 cycles | EIA-364-09 | 7.24 kgf | 6.68 kgf | 6.99 kgf | 0.5~2.0 kgf | OK |
| Durability Force | 0.8~2.0 kgf after 10,000 cycles | EIA-364-09 | 9.37 kgf | 8.67 kgf | 9.14 kgf | 0.8~2.0 kgf | OK |
| Pin | Signal | Pin | Signal |
|---|---|---|---|
| A1 | GND | B1 | GND |
| A2 | NC | B2 | NC |
| A3 | SBU1 | B3 | VCONN |
| A4 | VBUS | B4 | VBUS |
| A5 | D- | B5 | D- |
| A6 | D+ | B6 | D+ |
| A7 | CC1 | B7 | SBU2 |
| A8 | NC | B8 | NC |
| A9 | VBUS | B9 | VBUS |
| A10 | NC | B10 | NC |
| A11 | NC | B11 | NC |
| A12 | GND | B12 | GND |
| No. | Part Name | Qty | Material | Finish |
|---|---|---|---|---|
| 1 | Housing | 1 | PBT+GF UL94 V-0, Black | - |
| 2 | Contact | 16 | C7025 TH (0.25 L) | 10u"Au/Ni Plated |
| 3 | Ground Bar | 1 | SUS304, t=0.5mm | No Plating |
| 4 | Shell | 1 | SUS304-1/2H, t=0.30mm | 30u"Ni Min. |
