Product Name: TYPE-C 16PinSMT
Brand: HX
Description: A Type-C connector with 16 pins, designed for board-mount SMT (Surface Mount Technology) applications. Rated for 5A current and 20V voltage.
Key Features:
Application Scenarios: Widely used in consumer electronics, mobile devices, and other applications requiring a robust and high-performance USB Type-C connection.
| Parameter | Test Conditions | Specification | Unit |
|---|---|---|---|
| Rated Voltage | 20 | V DC | |
| Rated Current | 5 | A | |
| VBUS Pin Current | 1.25 | A | |
| Other Pin Current | 0.25 | A | |
| Contact Resistance | 20mV, 100mA | 40 | m Max |
| Insulation Resistance | DC 100V, 1 min | 100 | M Min |
| Withstanding Voltage | AC 100V, 1 min, 0.5mA | 100 | V AC |
| Insertion Force | 0.5-2.0 | Kgf | |
| Withdrawal Force | 0.6-2.0 | Kgf | |
| Durability (No Load) | 10000 | Cycles | |
| Durability (Load) | Rating Condition (Non-inductive) | 10000 | Cycles |
| Operating Temperature Range | -30 to +80 | ||
| Solderability Test | Dipped in solder bath 2505 for 50.5 sec | Solder wetting time 3 sec, Soldering area 75% | |
| Resistance to Soldering Heat (Reflow) | Preheat 180/120s, Peak temp 2605/20s | No deformation, electrical characteristics satisfied | |
| Resistance to Soldering Heat (Iron) | Bit temp 3305, Time 30.5 sec | No deformation, electrical characteristics satisfied | |
| Humidity Test | 402, 90%-96% RH for 96 Hr, then 1 hr at standard conditions | Appearance, mechanical & electrical characteristics satisfied | |
| Heat Test | 702 for 96 Hr, then 1 hr at room temp | Appearance, mechanical & electrical characteristics satisfied | |
| Cold Test | -253 for 96 Hr, then 1 hr at standard conditions | Appearance, mechanical & electrical characteristics satisfied | |
| Temperature Cycling Test | 5 Cycles (details in figure) | No deformation/cracks, Insertion/Extraction Force 3-20N, Contact Resistance Max 30m, Insulation Resistance Min 100M, Withstanding Voltage 100VAC/min | |
| Cold & Heat Shock Test | 5 Cycles (details in figure) | No deformation/cracks, Insertion/Extraction Force 3-25N, Contact Resistance Max 30m, Insulation Resistance Min 100M, Withstanding Voltage 500VAC/min |
