This product is a USB Type-C connector designed for high-temperature applications and demanding environments. It features robust construction with a high-temperature resistant plastic housing (UL94 V-0), copper alloy contacts, and a stainless steel mid-plate. The connector is built for durability with a high cycle life and meets stringent electrical and environmental performance standards, including support for IR reflow soldering.
16XN-4XSD43
High Temperature Resistant Plastic (UL94 V-0)
Copper Alloy
Stainless Steel
Ni 50u" MIN. Under Plated Over All; Au Plated on Functional Area; Gold Flash on Solder Area
Ni 30u" MIN. Under Plated Over All
| Specification | Value |
|---|---|
| Insertion Force | 0.5~2.0 kgf |
| Removal Force | 0.8~2.0 kgf |
| Durability | 10000 Cycles |
| Current Rating | 5A |
| Voltage Rating | 20V |
| Insulation Resistance | 100 M MIN |
| Dielectric Withstand Voltage | AC 100V for 1 Minute |
| Low Contact Resistance (Initial) | 40 m |
| Operating Temperature | -30C to +80C |
| IR Reflow Peak Temperature | 260C (maintained for 10 seconds) |
| Pin Number | Signal Name | Plating (Au Thickness) |
|---|---|---|
| A1 | GND | - |
| B1 | VBUS | - |
| A2 | D- | - |
| B2 | D+ | - |
| A3 | SBU1 | - |
| B3 | SBU2 | - |
| A4 | VBUS | - |
| B4 | GND | - |
| A5 | CC1 | 15u" |
| B5 | VCONN | 15u" |
| A6 | DMPR | - |
| B6 | DP | - |
| A7 | TX2+ | 30u" |
| B7 | RX2- | 30u" |
| A8 | TX1- | 30u" |
| B8 | RX1+ | 30u" |
| A9 | VBUS | - |
| B9 | GND | - |
| A10 | DMPR | - |
| B10 | DP | - |
| A11 | TX2- | 30u" |
| B11 | RX2+ | 30u" |
| A12 | GND | - |
