This document specifies the TYPE-C 14P LTH10.0 connector, designed for reliable electrical and mechanical performance. It features durable materials, specific electrical characteristics like low contact resistance and high insulation resistance, and robust mechanical properties including insertion and extraction forces, and extensive durability testing. The product is suitable for a wide operating temperature range and meets stringent testing standards for solderability, heat resistance, humidity, and cold/heat shock.
| Item | Test Conditions | Performance/Specification |
| Materials | ||
| Core | LCP+30%G.F UL94V-0 | |
| Terminal | High Conductivity Copper C7025/C2680 | |
| Housing | SUS201/SUS304, T=0.30mm | |
| Middle Clamp Piece | SUS301/SUS201 | |
| Electrical Characteristics | ||
| Rated Current | 3A/5A | |
| Contact Resistance | Initial Value | 40m MAX |
| Contact Resistance | After Test | 50m MAX |
| Insulation Resistance | 100M MIN | |
| Dielectric Strength Test | 100V AC R.M.S. | |
| Mechanical Characteristics | ||
| Overall Insertion Force | Initial | 5-20N |
| Overall Insertion Force | After Durability | 5-20N |
| Overall Extraction Force | Initial | 8-20N |
| Overall Extraction Force | After Durability | 6-20N |
| Durability | 10000 cycles | |
| Environmental & Special Tests | ||
| High Temperature Resistance | SMT Reflow Peak (2605) | No blistering, melting, or unacceptable discoloration/warping. |
| Solderability Test | Tin area | 95% or more |
| Salt Spray Test | 24H MIN | |
| Working Temperature | -30+85 | |
| Standard Atmospheric Conditions | Temperature | 5 to 35 |
| Standard Atmospheric Conditions | Humidity | 45% to 85% |
| Standard Atmospheric Conditions | Pressure | 86Kpa to 106Kpa |
| Connection Force | After 3 cycles with standard plug gauge | 0.5-2.0Kgf |
| Disconnection Force | After 3 cycles with standard plug gauge | 0.8-2.0Kgf |
| Terminal Strength | Static Load 0.1N/m (1kgf/cm) for 1 min | No damage (cracks, looseness, play). Electrical and mechanical characteristics satisfied. |
| Contact Resistance | Measured at small current (100mA), 1000Hz | 30m MAX |
| Insulation Resistance | Apply 100V DC for 1 min (between body/conductor, between conductors) | 100M MIN |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min, Trip Current: 0.5mA | No damage, arcing, or breakdown. |
| Solderability Test | Terminal dipped 1mm in solder bath (2505) for 50.5 sec | Solder wetting time 3 sec, Soldering area > 75% |
| Resistance to Soldering Heat Test | Reflow Soldering (Peak 2605 for 20 sec) | No deformation of case, no excessive looseness of terminals. Electrical characteristics satisfied. |
| Resistance to Soldering Heat Test | Soldering Iron Method (3305 for 30.5 sec) | No deformation of case, no excessive looseness of terminals. Electrical characteristics satisfied. |
| Humidity Test | 402, 90%-96% RH for 96 Hr, then 1 Hr at standard conditions | Appearance and characteristics satisfied. |
| Heat Test | 702 for 96 Hr, then 1 Hr at room temp | No damage on appearance. Mechanical and electrical characteristics satisfied. |
| Cold Test | -253 for 96 Hr, then 1 Hr at standard conditions | No damage on appearance. Mechanical and electrical characteristics satisfied. |
| Life Test (No Load) | 10000 cycles at 10-25 cycles/min | Contact Resistance 0.1, Disconnection Force 0.8-2.0N, other characteristics satisfied. |
| Life Test (With Load) | Rating condition (non-inductive load), 10000 cycles at 10-20 cycles/min | Contact Resistance 0.1, Disconnection Force 0.8-2.0N, other characteristics satisfied. |
| Temperature Cycling Test | 5 cycles (details in figure) | No deformation or cracks. Insertion/Extraction Force: 3-20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Cold & Heat Shock Test | 5 cycles (details in figure) | No deformation or cracks. Insertion/Extraction Force: 3-25N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
