This TYPE-C connector is designed for high-performance applications, offering a rated current of 5A and a durability of 10,000 cycles. It features robust materials and stringent testing to ensure reliability in various environmental conditions.
Ideal for use in electronic devices requiring reliable data and power connections, including consumer electronics, industrial equipment, and automotive applications where performance and longevity are critical.
| Item | Test Conditions | Performance | Specification |
|---|---|---|---|
| Contact Resistance (Initial) | Measured at small current (100mA or less), 1000Hz | MAX | 40 m |
| Contact Resistance (After Durability) | 0.1 | ||
| Insulation Resistance | Apply a voltage of 100V DC for 1 min | MIN | 100 M |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min, Trip Current: 0.5mA | Without damage, arcing, or breakdown | 100V AC |
| Insertion Force | After connecting and disconnecting using standard plug gauge 3 times | 5-20 N | |
| Insertion Force (After Durability) | 5-20 N | ||
| Extraction Force | After connecting and disconnecting using standard plug gauge 3 times | 8-20 N | |
| Extraction Force (After Durability) | 6-20 N | ||
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to tip for 1 min | No damage, looseness, or play; electrical and mechanical characteristics satisfied | N/A |
| Solderability Test | Terminals dipped 1mm in solder bath at 2505C for 50.5 seconds | Solder wetting time 3 sec; Soldering area 75% | N/A |
| Resistance to Soldering Heat (Reflow) | Peak temp 2605C within 20 seconds | No deformation of case or excessive looseness of terminals; electrical characteristics satisfied | N/A |
| Resistance to Soldering Heat (Iron) | Bit temp 3305C for 30.5 sec | No deformation of case or excessive looseness of terminals; electrical characteristics satisfied | N/A |
| Humidity Test | 402C, 90%-96% RH for 96 Hr, then 1 Hr at standard conditions | Appearance, mechanical, and electrical characteristics satisfied | N/A |
| Heat Test | 702C for 96 hours, then 1 Hr at room temp | No damage on appearance; mechanical and electrical characteristics satisfied | N/A |
| Cold Test | -253C for 96 hours, then 1 Hr at room temp | No damage on appearance; mechanical and electrical characteristics satisfied | N/A |
| Life Test (No Load) | 10,000 cycles at 10-25 cycles/min | Contact resistance 0.1; Extraction force 0.8-2.0N; Mechanical and electrical characteristics satisfied | 10,000 cycles |
| Life Test (With Load) | 10,000 cycles at 10-20 cycles/min (Non-inductive load) | Contact resistance 0.1; Extraction force 0.8-2.0N; Mechanical and electrical characteristics satisfied | 10,000 cycles |
| Temperature Cycling Test | 5 cycles (e.g., -40C to 80C) | No deformation or cracks; Insertion/Extraction Force 3-20N; Contact Resistance Max.30m; Insulation Resistance Min.100 M; Dielectric Withstanding Voltage 100VAC/min | N/A |
| Cold & Heat Shock Test | 5 cycles (e.g., -20C to 70C) | No deformation or cracks; Insertion/Extraction Force 3-25N; Contact Resistance Max.30m; Insulation Resistance Min.100 M; Dielectric Withstanding Voltage 500VAC/min | N/A |
| Salt Spray Test | 24H MIN |
