This product is a TYPE-C connector designed for various electronic applications. It offers robust electrical and mechanical characteristics suitable for demanding environments.
Ideal for consumer electronics, industrial equipment, and automotive applications requiring a reliable USB Type-C connection.
| Item | Test Conditions | Performance Specification | Unit |
|---|---|---|---|
| Contact Resistance | Measured at 20mv, 100mA | 40 Max | m |
| Contact Current | VBUS Pin | 3 | A |
| Contact Current | GND Pin | 1.25 | A |
| Contact Current | Other Pins | 0.25 | A |
| Rated Voltage | 20 | V | |
| Dielectric Strength | 100VAC for 1 min | 100 | VAC |
| Insulation Resistance | DC 100V for 1 min | 100 Min | M |
| Insertion Force | 0.5 - 2.0 | Kgf | |
| Extraction Force | 0.6 - 2.04 | Kgf | |
| Durability (Cycles) | No Load | 5000 | Cycles |
| Durability (Cycles) | With Load | 5000 | Cycles |
| Operating Temperature | -30 to +80 |
| Item | Test Conditions | Performance Specification | Unit |
|---|---|---|---|
| Solderability Test | Dipped 1mm in solder bath 2505 for 50.5 sec | Solder wetting time 3 sec, Soldering area > 75% | |
| Resistance to Soldering Heat (Reflow) | Preheat 180/120s, Peak 2605/20s | No deformation, Electrical characteristics satisfied | |
| Resistance to Soldering Heat (Iron) | Bit temp 3305, Time 30.5 sec | No deformation, Electrical characteristics satisfied | |
| Humidity Test | 402, 90%-96% RH for 96 Hr, then 1 Hr at standard conditions | No appearance damage, Mechanical & Electrical characteristics satisfied | |
| Heat Test | 702 for 96 Hours, then 1 Hr at room temp | No appearance damage, Mechanical & Electrical characteristics satisfied | |
| Cold Test | -253 for 96 Hours, then 1 Hr at room temp | No appearance damage, Mechanical & Electrical characteristics satisfied | |
| Temperature Cycling Test | 5 cycles (-40 to 80) | No deformation/cracks, Insertion/Extraction Force: 3-20N, Contact Resistance: Max 30m, Insulation Resistance: Min 100M, Dielectric Withstanding Voltage: 100VAC/min (between terminals) | |
| Cold & Heat Shock Test | 5 cycles (-20 to 70) | No deformation/cracks, Insertion/Extraction Force: 3-25N, Contact Resistance: Max 30m, Insulation Resistance: Min 100M, Dielectric Withstanding Voltage: 500VAC/min (between terminals) |
