This document details the test report for the Horizontal Type-c 16P Female SMT Mid-Mount 1.6 L=6.5mm connector, model GT-USB-9014C, manufactured by G-Switch Technology (Dongguan) Co., Ltd. The connector is designed for USB Type-C applications and has undergone rigorous testing according to EN/SASO IEC 62680-1-3 standards to ensure compliance with DC electrical, mechanical, and environmental requirements.
| Test Clause | Test Item | Requirement |
|---|---|---|
| 3.7.8.1 | Low Level Contact Resistance (LLCR) | 40 m(max) initial for VBUS, GND and all other contacts; 50 mmaximum after initial measurement. |
| 3.7.8.2 | Dielectric Withstanding Voltage | 100 VAC (RMS) for one minute at sea level after environmental stress defined in Table 4-8, Test Group A-7. |
| 3.7.8.3 | Insulation Resistance | A minimum of 100 Minsulation resistance is required between adjacent contacts of unmated and mated connectors. |
| 3.7.8.4 | Contact Current Rating | 5 A for VBUS pins (A4, A9, B4, B9) and VCONN pin (B5); 1.25 A for VCONN pin (B5); Minimum 0.25 A for all other contacts. |
| 3.8.1.1 | Insertion force | Refer to test results in Section 8.7. |
| 3.8.1.2 | Extraction force | Refer to test results in Section 8.8. |
| 3.8.1.3 | Durability | Refer to test results in Section 8.9. |
| 3.8.1.3 | Reseating | Refer to test results in Section 8.10. |
| 3.8.1.6 | 4-Axis Continuity | Refer to test results in Section 8.11. |
| 3.8.2 | Temperature life | Refer to test results in Section 8.12. |
| 3.8.2 | Thermal shock | Refer to test results in Section 8.13. |
| 3.8.2 | Cyclic temperature and humidity | Refer to test results in Section 8.14. |
| 3.8.2 | Vibration | Refer to test results in Section 8.15. |
| 3.8.2 | Mixed flowing gas | Refer to test results in Section 8.16. |
| 3.8.2 | Thermal disturbance | Refer to test results in Section 8.17. |
