This document details the confact (layout) for a board, specifically focusing on the EE-Zone for through-plated holes and the board hole pattern on the component mounting side. It specifies hole diameters for both drilled and finished plated-through holes, as well as the layer structure within the metallized hole. Information regarding missing ground and specifications per IEC 61076-4-101, along with marking details, are also referenced. The product is available without locating pegs and with a shielding plate mounted on top.
ERMEC
Female Type A
IEC 61076-4-101
Without locating pegs
Mounted on top
| Description | Value | Unit |
|---|---|---|
| EE-Zone for through-plated holes | > 0.6 | mm |
| Board hole pattern (Component mounting side) - All holes | - | - |
| Diameter of finished plated-through hole | 0.6 | +0.05 mm |
| Diameter of drilled hole | 0.7 | :0.02 mm |
| Metal plating of plated-through hole | See drawing 114406 | - |
| Missing information and dimensions | Per IEC 61076-4-101 | - |
| Marking | See drawing 401194 | - |
