This product is designed for applications demanding high reliability, particularly in automotive equipment and devices. It offers robust electrical and mechanical characteristics suitable for demanding environments.
| Characteristic | Rating | Condition/Notes |
|---|---|---|
| Operating temperature range | -20 C to +70 C | 90 %RH Max. |
| Storage temperature range | -40 C to +90 C | 90 %RH Max. |
| Contact resistance (Center contact) | 60 m Max. | 10 mA Max. (DC or 1000 Hz) |
| Contact resistance (Outer contact) | 20 m Max. | 10 mA Max. (DC or 1000 Hz) |
| Insulation resistance | 500 M Min. | 100V DC |
| Withstanding voltage | 200 V AC for 1 min. | Current leakage 2 mA Max. |
| Voltage standing wave ratio (VSWR) | 1.5 Max. | 0 to 15 GHz |
| Voltage standing wave ratio (VSWR) | 2.0 Max. | 15 to 20 GHz |
| Voltage standing wave ratio (VSWR) | 2.5 Max. | 20 to 30 GHz |
| Contact insertion force | 30 N Max. | Measured with an applicable connector. |
| Contact extraction force | 3 to 25 N | Measured with an applicable connector. |
| Mechanical operation | 20 times | Insertion and extractions. |
| Vibration | 1.5 mm (single amplitude) | 10 to 100 Hz, over 5 cycles in 3 directions. |
| Shock | 59 m/s | over 5 cycles in 3 directions. |
| Shock (Pulse) | 735 m/s | directions of pulse 11 ms at 3 times in 6 directions. |
| Cable clamp strength (Against cable pull) | --- | Using a pulling tester. (Details not fully specified) |
| Damp heat | --- | Exposed at +40 C, 95 %RH, total 96 h (4 cycles). |
| Insulation resistance (at high humidity) | 10 M Min. | After Damp Heat test. |
| Insulation resistance (when dry) | 500 M Min. | After Damp Heat test and drying. |
| Rapid change of temperature | --- | Under 5 cycles. (30 min. at low temp, 3 min. at high temp) |
| Test Type | Description | Notes |
|---|---|---|
| General examination | Visually and by measuring instrument. | According to drawing. |
| Marking | Confirmed visually. | |
| Contact resistance | Center contact 65 m Max., Outer contact 25 m Max. | 1) No electrical discontinuity of 1 s. 2) No damage, cracks or looseness of parts. |
| Insulation resistance | 10 M Min. (at high humidity) | 3) No damage, cracks or looseness of parts. |
| Insulation resistance | 500 M Min. (when dry) | 3) No damage, cracks or looseness of parts. |
| Withstanding voltage | No flashover or breakdown. | 2) No damage, cracks or looseness of parts. |
