This product is a connector designed for applications requiring high reliability, with a focus on electrical and mechanical performance across a wide temperature range. It offers stable electrical characteristics such as low contact resistance and high insulation resistance, along with robust mechanical durability tested for insertion/withdrawal cycles and environmental resistance. The product is suitable for various industrial applications where consistent performance is critical.
| Specification Category | Item | Test Method | Specification | QT | AT |
|---|---|---|---|---|---|
| Applicable Specifications | Operating Temperature Range | -40 to +85 (90%RH or less) | |||
| Storage Temperature Range | -40 to +85 (90%RH or less) | ||||
| Characteristic Impedance | 50 (0 to 30 GHz) | ||||
| Electrical Performance | Contact Resistance (Center Contact) | 10 mA (DC or 1000 Hz) | 20 m or less | ||
| Contact Resistance (External Contact) | 10 mA (DC or 1000 Hz) | 10 m or less | |||
| Insulation Resistance | DC 100V | 500 M or more | |||
| Withstand Voltage | Apply AC 250V for 1 minute (Leakage current 2 mA or less) | No flashover or insulation breakdown | |||
| Voltage Standing Wave Ratio (VSWR) | 0 to 15 GHz | 1.3 or less | |||
| Voltage Standing Wave Ratio (VSWR) | 15 to 20 GHz | 1.4 or less | |||
| Voltage Standing Wave Ratio (VSWR) | 20 to 30 GHz | 1.5 or less | |||
| Mechanical Performance | Insertion Force (Individual) | Measured with 0.495 steel pin [H2.4 side] | 0.2 to 1.0 N | ||
| Withdrawal Force (Individual) | Measured with 0.495 steel pin [H2.4 side] | 0.2 to 1.0 N | |||
| Durability | 500 mating cycles | 1. Center Contact: 25 m or less 2. External Contact: 15 m or less 3. No damage, cracks, or loose parts. | |||
| Environmental Performance | Damp Heat (Steady State) | Place in +40, 95% RH for 96 hours | 1. Insulation Resistance: 10 M or more (high humidity) 2. Insulation Resistance: 500 M or more (dry) 3. No damage, cracks, or loose parts. | ||
| Temperature Cycle | -40 5-35 +85 5-35 (30 3 30 3 min) for 5 cycles | No damage, cracks, or loose parts. | |||
| Salt Spray | Place in 5% salt water for 48 hours | Satisfy VSWR specification. |
