This 1x1 Port Tab-UP RJ45 Connector with Integrated Magnetics and LED is designed for 10/100Base-TX NIC applications. It offers high performance for EMI suppression, crosstalk, return loss, and consistent electrical characteristics. The integrated magnetics minimize PCB space and simplify layout, leading to higher reliability and yields. It meets or exceeds IEEE802.3 standards, including a minimum 350uH OCL with 8mADC and a minimum 1500Vrms isolation per IEEE802.3 requirement.
| Specification | Value | Condition |
|---|---|---|
| Operating Temperature Range | -40C ~ +85C | |
| Storage Temperature Range | -40C ~ +85C | |
| Isolation | 1500Vrms | 0.5mA 60sec (J1~8 to P1~6) |
| OCL | 350uH Minimum | @100KHz 100mV with 8mADC |
| Insertion Loss | -1.0dB Maximum | @300KHz ~ 100MHz |
| Return Loss | -20dB Minimum | @1MHz ~ 10MHz |
| -16dB Minimum | @10MHz ~ 30MHz | |
| -12dB Minimum | @30MHz ~ 60MHz | |
| -10dB Minimum | @60MHz ~ 80MHz | |
| Common Mode Rejection | -30dB Minimum | @1MHz ~ 50MHz |
| Crosstalk | -40dB Minimum | @1MHz ~ 30MHz |
| -35dB Minimum | @30MHz ~ 60MHz | |
| -20dB Minimum | @50MHz ~ 150MHz | |
| -30dB Minimum | @60MHz ~ 100MHz | |
| LED (Green) Forward Voltage | 1.8 ~ 2.8V | |
| LED (Green) Drive Current | 20mA | |
| LED (Green) Wave Length | 568 ~ 573 nm typ. | |
| LED (Yellow) Forward Voltage | 1.8 ~ 2.8V | |
| LED (Yellow) Drive Current | 20mA | |
| LED (Yellow) Wave Length | 585 ~ 592 nm typ. |
| Schematic Pin | RJ45 Jack Pin | UTP Side | Description |
|---|---|---|---|
| P6 | RD | ||
| P5 | D | Chip | |
| P3 | | 1ae | 1omicT | RO+ | |
| P2 | e | TD | |
| P1 | | 1000pF | TD+ | |
| P7 | o | 2KV | NC | |
| P8 | CHS GND | Connect CHS GND to PCB Ground | |
| Yellow LED | |||
| Green LED |
