The Amphenol RJE01 series of inverted modular jacks are designed for general use and performance in a variety of applications. These connectors offer superior EMI performance, supporting Ethernet Protocols, with shielding options available for enhanced EMI protection. They are suitable for single, multiport, and right-angle configurations.
| Specification | Details |
|---|---|
| Contact Resistance | 20 m max |
| Insulation Resistance | 500 M minimum at 500V DC for 2 minutes max |
| Current Rating | 1.5 Amps per contact |
| Voltage Rating | 125 Volts AC |
| DWV | 1000 VAC, 60 Hz, 1 min |
| PoE Support | Supports PoE, PoE+, and PoE++ per IEEE PoE standards |
| Mating Connector Insertion Force | 5.0 lbs maximum |
| Mating Connector Pull Retention Force | 20.0 lbs minimum |
| Durability | 750 mating and unmating cycles for 50 gold plating |
| Recommended Soldering Temperature | Wave soldering peaked at 260C for 5 seconds maximum |
| Operating Temperature | -40C to +85C |
| Contact Gold Thickness Options | 6, 15, 30, 50 |
| Nickel Plating on Contact Mating Area | 50 minimum |
| Matte Tin Plating on Soldering Tail | 100 minimum |
| Available Models (Examples) | RJE01-X40-01-X (Single port, through-hole, without shield) RJE01-662-02 (Dual port, through-hole, with shield, with top and side ground tabs) RJE01-145-01 (Single port, through-hole, with shield and PCB tail) RJE01-660-02 (Dual port, through-hole, without shield, without LEDs) RJE01-6X0-01 (Single port, through-hole, without shield) |
