This section details the component layout and considerations for various card types, including full-size and half-mini cards. It highlights areas for hold-down solutions and component live areas, emphasizing the importance of correct board pattern and metallization for reliable contact.
| Card Type | Width (mm) | Height (mm) | Component Area (Top Side) (mm) | Component Area (Bottom Side) (mm) | Hold Down Area (mm) | Pin 1 Reference | Detail Scale |
|---|---|---|---|---|---|---|---|
| Full-Mini Card (Top & Bottom) | 42 | - | - | - | - | Pin 2 | 1:1 |
| Half-Mini Card | 300 | - | - | - | - | - | 1:1 |
| Full Card | 455 | 135 | 385 x 135 | 385 x 135 | 455 x 135 | Pin 2 | 1:1 |
| Half Card | 208.5 | 135 | 175 x 135 | 175 x 135 | 208.5 x 135 | Pin 2 | 1:1 |
| Half Card (Option 1) | 385 | 135 | 350 x 135 | 350 x 135 | 385 x 135 | Pin 2 | 1:1 |
| Detail | Scale | Notes |
|---|---|---|
| Detail L | 1:1 | Card thickness assumes across PTG and/or metallization. |
| Detail O | 2:1 | Recommended 2U board pattern layout. |
