This specification document outlines the details for the MICRO 180 connector from Shenzhen Shouhan Technology Co., Ltd. It covers material composition, working conditions, electrical, mechanical, and environmental performance specifications, along with testing methods and standards.
| Part No. | MICRO 180 | Material Code | MICRO 180JB |
| Material Details | |||
| Plastic Part | LCP UL94V-0 | ||
| Contact Terminal Part | C5191R-H, Nickel base, Gold plated contact area 1 | ||
| Shell Part | C2680R-H, Nickel plated base 50, Nickel plated 80 | ||
| Working Conditions | |||
| Working Voltage | 30VAC RMS Max | ||
| Working Current | 1.0 Ampere | ||
| Operating Temperature | -30+80 | ||
| Electrical Performance | |||
| Test Item | Specification & Standard | Test Method & Reference Standard | Value |
| Contact Resistance | 50m MAX | Measure impedance at contact area with low power current. Ref: EIA 364-23A | - |
| Insulation Resistance | 100M MIN | Measure impedance between adjacent contact pins. Ref: EIA 364-21A | - |
| Withstand Voltage Test | 100V DC / 100V AC 1 minute 0.5mA | Test high voltage between contact pins. Ref: EIA 364-20A | - |
| Mechanical Performance | |||
| Insertion Force | 3.57kgf MAX | When matching with wire terminal, insertion speed 25mm/min. Ref: EIA 364-13A | - |
| Extraction Force | 1.00kgf MIN | When matching with wire terminal, extraction speed 25mm/min. Ref: EIA 364-13A | - |
| Terminal Single PIN Retention Force | 0.3 kgf MIN | Contact PIN retracting force from plastic at 25mm/min. | - |
| Durability Test | 3000 cycles | Plug and unplug at a uniform speed of 600 cycles per hour. Ref: EIA 364-09A | - |
| Vibration Test | Amplitude 1.5mm, 10Hz-55Hz-10Hz cycle for 2 hours in X/Y/Z directions | Frequency 10Hz to 55Hz per minute, continuous test. Ref: EIA 364-28A | - |
| Environmental Performance | |||
| Solderability | Tin dipping area >95% | Product welding area immersed in 2355 tin bath for 50.5 seconds. Ref: MIL STD-202F | - |
| High Temperature Resistance | Appearance without obvious damage, Contact Resistance 100m MAX, Insulation Resistance 100M MIN | Product placed in 85 oven for 96 hours, then at room temperature for 3 hours. Ref: MIL STD-1344A | - |
| Low Temperature Resistance | Appearance without obvious damage, Contact Resistance 100m MAX, Insulation Resistance 100M MIN | Product placed in -40 oven for 96 hours, then at room temperature for 3 hours. Ref: MIL STD-1344A | - |
| Humidity Resistance | Appearance without obvious damage, Contact Resistance 100m MAX, Insulation Resistance 100M MIN | Product placed in 402, 9095%RH environment for 120 hours. Ref: EIA 364-31A | - |
| Corrosion Resistance | Appearance without obvious corrosion, Contact Resistance 50m MAX | Product placed in salt spray chamber with 5% salt concentration, 352 for 12 hours, then at room temperature for 1 hour. Ref: EIA 364-26A | - |
| Solderability (Reflow) | Appearance without obvious discoloration/bubbling; Solder foot wetting smooth | Recommended reflow curve: (details omitted as not fully specified) | - |
