This document outlines the recommended PCB layout for a component, focusing on signal integrity and adherence to standards. It details keep-out areas and pin assignments for USB 2.0 differential pairs and bus power.
| Pin | Signal Name | Description | Configuration |
|---|---|---|---|
| 1 | VBUS | Bus Power | |
| 2 | D- | USB 2.0 differential pair - Position 1 (Negative half) | |
| 3 | D+ | USB 2.0 differential pair - Position 1 (Positive half) | |
| 4 | GND | Ground return | |
| 5 | SSRX- | SuperSpeed RX differential pair (Negative half) | |
| 6 | SSRX+ | SuperSpeed RX differential pair (Positive half) | |
| 7 | SSRX GND | SuperSpeed RX Ground return | |
| 8 | SBU1 | Sideband 1 | |
| 9 | SS TX- | SuperSpeed TX differential pair (Negative half) | |
| 10 | SS TX+ | SuperSpeed TX differential pair (Positive half) | |
| 11 | SS TX GND | SuperSpeed TX Ground return | |
| 12 | SBU2 | Sideband 2 | |
| 13 | VBUS | Bus Power | |
| 14 | D- | USB 2.0 differential pair - Position 2 (Negative half) | |
| 15 | D+ | USB 2.0 differential pair - Position 2 (Positive half) | |
| 16 | GND | Ground return |
