This document outlines the technical specifications for the USB-AF connector from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. Designed for reliable performance within a practical temperature range of -25C to 85C, this connector adheres to standard atmospheric conditions for testing, ensuring consistent operation.
| Item | Test Conditions | Performance Specification |
|---|---|---|
| Connection & Disconnection Force | After 3 cycles using standard plug gauge | Connection: 35N Disconnection: 10N |
| Insertion & Extraction Force (Life Test) | 3 to 20N (No Load) 3 to 25N (Cold & Heat Test) | |
| Terminal Strength | 0.1N/m (1kgf/cm) static load for 1 min | No damage, meets electrical & mechanical characteristics |
| Contact Resistance | At small current ( 100mA), 1000Hz | 30m MAX |
| Insulation Resistance | DC 100V for 1 min (between body/conductor, non-contact conductors, non-contact when plug inserted) | 1000M MIN |
| Dielectric Strength | AC 500V ims (50-60Hz) for 1 min, trip current 0.5mA (between body/conductor, non-contact conductors, non-contact when plug inserted) | No damage, arcing, or breakdown |
| Solderability Test | Terminal dipped 1mm in solder bath (2505) for 50.5 sec | Wetting time 3 sec, Soldering area > 75% |
| Resistance to Soldering Heat Test | Reflow soldering conditions (Preheat 180/120s, Peak 2605/20s) | No deformation, meets electrical & mechanical characteristics |
| Soldering iron method (Bit temp 3305, Time 30.5 sec) | No deformation, meets electrical & mechanical characteristics | |
| Humidity Test | 402, 90%-96% RH for 96 Hr, then 1 Hr standard conditions | Meets appearance, mechanical & electrical characteristics |
| Heat Test | 702 for 96 Hr, then 1 Hr recovery | No damage on appearance, meets mechanical & electrical characteristics |
| Cold Test | -253 for 96 Hr, then 1 Hr recovery | No damage on appearance, meets mechanical & electrical characteristics |
| Life Test | 5000 cycles (No Load) at 10-25 cycles/min | Contact resistance 0.1, Disconnection force 7N, Meets mechanical & electrical characteristics |
| 5000 cycles (Rated condition, non-inductive load) at 10-20 cycles/min | Contact resistance 0.1, Disconnection force 0.8 to 2.0N, Meets mechanical & electrical characteristics | |
| Temperature Cycling Test | 5 cycles (details in figure) | No deformation/cracks, Insertion/Extraction Force 3-20N, Contact Resistance MAX 30m, Insulation Resistance MIN 100M, Dielectric Withstanding Voltage 100VAC/min (between terminals) |
| Cold & Heat Shock Test | 5 cycles (details in figure) | No deformation/cracks, Insertion/Extraction Force 3-25N, Contact Resistance MAX 30m, Insulation Resistance MIN 100M, Dielectric Withstanding Voltage 500VAC/min (between terminals) |
Electrical Rating: DC 30V 1.5A
Drawn by:
Checked by:
Approved by:
