The Oupiin 2011 Series Pin Header is a 2.54mm pitch connector available in single, double, and triple row configurations. It supports both straight and right-angle orientations and is designed for solder termination. This series is manufactured by Oupiin Electronic Co.,Ltd. and is suitable for various electronic applications requiring reliable connections.
| Product Name | Part No. | Drawing No. | Description | Rating Current | Rating Voltage | Temperature Range |
|---|---|---|---|---|---|---|
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)Sx-x | 2011D01042 | Single Row, Straight/Right Angle, Solder Type | 3A | 110V AC | -40~+105 |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)RB | 2011D01003 | Single Row, Right Angle, Solder Type | 3A | 110V AC | -40~+105 |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)LB | 2011D01105 | Single Row, Right Angle, Solder Type | 3A | 110V AC | -40~+105 |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxG00RW-4-4-0.4B | 2011D01077 | Single Row, Right Angle, Solder Type | 3A | 110V AC | -40~+105 |
| 2011 Series Pin Header 2.54mm Double Row Straight/Right Angle Solder Type | 2011-2XxxGxx(T)SB | 2011D01004 | Double Row, Straight, Solder Type | 3A | 110V AC | -40~+105 |
| 2011 Series Pin Header 2.54mm Double Row Straight/Right Angle Solder Type | 2011-2XxxGxx(T)RB | 2011D01102 | Double Row, Right Angle, Solder Type | 3A | 110V AC | -40~+105 |
| 2011 Series Pin Header 2.54mm Triple Row Straight/Right Angle Solder Type | 2011-3XxxGxx(T)SB | 2011D01005 | Triple Row, Straight, Solder Type | 3A | 110V AC | -40~+105 |
| 2011 Series Pin Header 2.54mm Triple Row Straight/Right Angle Solder Type | 2011-3XxxGxx(T)RB | 2011D01103 | Triple Row, Right Angle, Solder Type | 3A | 110V AC | -40~+105 |
The connector shall have the mechanical and electrical performance as described in drawing.
Rating current is 3A, rating voltage is 110V AC.
Temperature range: -40~+105. Storage Temperature: 0~+40, Humidity: 80%RH under. Time limit is 12 months the products are stored.
Connectors meet solder-ability to EIA-364-52 and shall be free of contaminants. A solder coverage of 95% minimum is required after testing.
Each solder cycle consists of three consecutive phases.
Product is designed to meet electrical, mechanical, and environmental performance requirements specified in Table I.
Unless otherwise specified, all tests shall be performed at ambient environmental conditions.
Test samples shall be selected at random from current production. No test samples shall be reused. Samples are pre-conditioned with 10 cycles of durability. Each group shall contain at least 5 test samples.
| Items | Requirements | Test Methods |
|---|---|---|
| Confirmation of Product | Product shall be conforming to the requirements of applicable product drawing. | Visually, dimensions and functionally inspected per applicable product drawing. |
| Contact Resistance | 20 m Max. | Subject mated contacts assembled in housing to open circuit of 100 mA max. 20 mV max. Per EIA-364-06 |
| Insulation Resistance | 1000 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. (500V DC) Per EIA-364-21 |
| Dielectric Withstanding Voltage | After testing, there shall be no breakdown. | Connector must withstand test potential of 1000V AC for 1 minute. Per EIA-364-20. |
| Retention Force | 0.8 Kg/pin. Min | Apply axial pullout force at the speed rate of 25.4 mm/minute. Per EIA-364-29 |
| Solder ability | There shall have a solder coverage of 95% minimum. | Soldering time: 3 to 5 seconds. Temperature: 2455 Per EIA-364-52 |
