The MEC1 series is a family of connectors designed for card edge applications. These connectors facilitate the interconnection of printed circuit boards, offering various configurations for different density and thickness requirements. They are suitable for applications requiring reliable and robust connections.
SAMTEC
6159045
Insulator: LCP
Contact: Phosphor Bronze
UL 94V-0
UL 94V-0
| Part Number Base | No. of Positions | Card Thickness | Plating | Row Specification | Tail Option | Non-Polarized Option | Packaging |
|---|---|---|---|---|---|---|---|
| MEC1-1XX-XX-XX-D-RAX-XX-SL-XX | -05, -08, -20, -30, -40, -50 (Fig 1) -60, -70 (Fig 2) | -01: .031" Thick Card -02: .062" Thick Card | -F: 3" Flash Gold (Contact), Matte Tin (Tail) -L: 10" Light Gold (Contact), Matte Tin (Tail) -S: 30" Selective Gold (Contact), Matte Tin (Tail) -FM: 3" Flash Gold (Contact), Matte Tin (Tail) -LM: 10" Light Gold (Contact), Matte Tin (Tail) -SM: 30" Selective Gold (Contact), Matte Tin (Tail) | -D: Double Row | -RA1: Standard -RA2: Elevated (Fig 3) | NP: No Polarized Position (Available on -05, -08, -20, -30) Blank: Body is Polarized | Blank: Tubes (Note 11) -TR: Tape & Reel (Notes 12 & 13) -FR: Full Reel Qty Tape & Reel (Notes 12 & 13) |
| Notes |
|---|
| 1. Represents a critical dimension. |
| 2. Maximum burr allowance: .004" [0.10mm]. |
| 3. Minimum pushout force: 0.5 lb. |
| 4. Tail Option -RA1 to have C-150-01-XX-X contact fully pre-formed. |
| 5. Bodies to be layer packaged for transit between inventory and production. |
| 6. To be measured at 2 main 90 bends. |
| 7. Measure first and last pin of each row. |
| 9. Mating edge card thickness tolerance: +10% of nominal for -01; +7.5% for -02. |
| 11. Tubes are standard packaging. |
| 12. Orders will be packaged according to SAMTEC Packaging Efficiency Standards (SPES). |
| 13. Attach LABEL-4X to each reel. |
| 14. Unless otherwise specified, dimensions are in inches. Tolerances: Decimals XX: .01 [0.3], XXX: .005 [0.13], XXXX: .0020 [0.081]. Angles: 5. |
